walogy - CATx G2 Camera Network Controller

walogy - CATx G2 Camera Network Controller


Professional PTZ Camera control solution.

Built-in multiple protocols such as VISCA, PELCO P/D, ONVIF, and abundant communication interfaces RS422/RS485/RS232 and IP. It is compatible with mayor PTZ cameras brands. It has a simple configuration and operation. With a shortcut button to control directly 7 cameras, 3 rotation buttons for AE/WB & focus, and 256 presets doing the controller is very flexible and adjustable. 4D-Joystick with 5 Level sensitivity for Pan/Tilt and Zoom. It is the best friend for Live Streaming, Broadcasting, Events, Conferencing, Education, Telemedicine...

In each situation, the walogy - CATx G2 will solve it.

Conferencing System, Live Streaming & Broadcasting, Telemedicine, Education Solution, AV Media Solution, Events

Even in the worst light conditions, you will have control.

For example, an operating room with excess light coming from the spotlights. Manual mode allows you to raise the shutter speed and close the diaphragm to contrast excess light, but that's not all. When the light is low, it can open the diaphragm and reduce the shutter speed.

The perfect solution for any kind of audiovisual production:

  • TV Stations
  • Live Youtubers
  • Live Events
  • Training Room
  • E-Learning
  • Live Radio
  • Religious Organizations
 

  • Direct control for 7 cameras
  • 3 Rotation Button
  • Automatic White Balance / Focus
  • 256 direct called presets
  • Flexible and adjustable Controller.
  • 4D Joystick with 5 sensitivity levels.

 

Input /Output Interface
Communication RS485 ,RS422, RS232, IP (VISCA OVER IP) & Micro USB(Upgrade)
Baud Rate 2400、4800、9600、19200、38400bps
Generic
working Temperature 0℃ ~ 40℃(32°F ~ 104°F)
Dimensions(L*W*H) 350 mm x 173 mm x 99 mm
G.W (KGS) 2.5KGS
User Interface
Display OLED Display Screen
CAM Shortkey Channel 7
Rotation Button 3
Joystick 1
Camera Control
IP Address from CAM 1 to CAM 7
UDP Port 08090
Cam ID 1~7, Others(Max 255)
Control Protocol VISCA, SONY VISCA , PELCO P/D, UDP, IP (VISCA OVER IP)
Others
Power adapter Input AC100V ~ 240V   Output DC 12V/2A
Voltage DC 12V & POE
Power consumption 24W
Using Environment Indoor
Pack included User Manuel / 4 PIN RS485 Terminal /Power Adapter

Data Sheet          Manual